Documentation

Downloads & guides

A quick overview to get you started. Every order includes a printed start guide with a QR code to the complete illustrated installation manual.

Professional installation strongly recommended

The product requires accurate measurement, alignment and tile cutting. Installation by a qualified tiler or bathroom installer is strongly recommended. Competent DIY installation is allowed, but you must follow the current manual and stop if anything is unclear.

Incorrect measurement, cutting or installation can damage the tile, wall finish, cistern, actuator or product. 3DeeHive is not responsible for damage caused by improper installation or use, except where liability cannot legally be excluded. Statutory rights regarding a defective product remain unaffected.

Compatibility—check before cutting

Designed for front-actuated Geberit Sigma and TECE concealed-cistern systems. Not intended for Geberit Omega, Delta or Kappa systems. Identify your cistern before ordering or cutting. If you are unsure, email contact@3deehive.com with photographs before starting.

Geberit and TECE are trademarks of their respective owners. 3DeeHive is independent and is not affiliated with, endorsed by or sponsored by those companies.

Quick-start overview

  1. Confirm the concealed cistern is a compatible front-actuated Geberit Sigma or TECE system.
  2. Check the wall construction, clearances and tile before installation.
  3. Use the supplied template to mark the exact position of the buttons.
  4. Project accurate horizontal and vertical reference lines.
  5. Transfer all markings and verify them before making any cut.

Installation requirements

  • Compatible tile materials: ceramic or porcelain suitable for precision cutting
  • Maximum tile thickness: 12 mm
  • A minimum depth of 30 mm from the cistern frame to the finished tile surface is required
  • Tile must be free from cracks or damage around the installation area
  • Rigid, stable wall construction is required; double cladding with moisture-resistant board is recommended
  • Provide approximately 26 × 18 cm clearance around the cistern opening for the magnetic mounting system

Cutting-kit contents

When the cutting-kit option is selected, the order includes two diamond saws, ten diamond grinding bits, two pieces of sanding paper and one attachment for fitting the saw to a compatible multitool. Follow the tool manufacturers' instructions, use suitable personal protective equipment and verify tool compatibility before use.

Need the full manual?

Access the complete illustrated installation manual using the QR code included with every order. Have a question before you buy? We are happy to help.

Contact us